View PMEG2010AEJ_4566841.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PMEG2010AEJ
20 V, 1 A very low VF MEGA Schottky barrier rectifier in SOD323F package
Rev. 03 -- 15 January 2010 Product data sheet
1. Product profile
1.1 General description
Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifier with an integrated guard ring for stress protection, encapsulated in a SOD323F (SC-90) very small and flat lead Surface Mounted Device (SMD) plastic package.
1.2 Features
Forward current: 1 A Reverse voltage: 20 V Very low forward voltage Very small and flat lead SMD plastic package
1.3 Applications
Low voltage rectification High efficiency DC-to-DC conversion Switch mode power supply Inverse polarity protection Low power consumption applications
1.4 Quick reference data
Table 1. Symbol IF VR VF
[1]
Quick reference data Parameter forward current reverse voltage forward voltage IF = 1000 mA
[1]
Conditions Tsp 55 C
Min -
Typ 480
Max 1 20 550
Unit A V mV
Pulse test: tp 300 s; 0.02.
NXP Semiconductors
PMEG2010AEJ
20 V, 1 A very low VF MEGA Schottky barrier rectifier
2. Pinning information
Table 2. Pin 1 2 Pinning Description cathode anode
[1]
Simplified outline
1 2
Symbol
1 2
sym001
[1]
The marking bar indicates the cathode.
3. Ordering information
Table 3. Ordering information Package Name PMEG2010AEJ SC-90 Description plastic surface mounted package; 2 leads Version SOD323F Type number
4. Marking
Table 4. Marking codes Marking code EM Type number PMEG2010AEJ
5. Limiting values
Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VR IF IFRM IFSM Ptot Tj Tamb Tstg
[1] [2]
Conditions Tsp 55 C square wave; tp = 8 ms Tamb 25 C
[1] [2]
Min -65 -65
Max 20 1 5.5 10 360 830 150 +150 +150
Unit V A A A mW mW C C C
reverse voltage forward current non-repetitive peak forward current total power dissipation junction temperature ambient temperature storage temperature repetitive peak forward current tp 1 ms; 0.25
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.
PMEG2010AEJ_3
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 03 -- 15 January 2010
2 of 9
NXP Semiconductors
PMEG2010AEJ
20 V, 1 A very low VF MEGA Schottky barrier rectifier
6. Thermal characteristics
Table 6. Symbol Rth(j-a) Rth(j-sp)
[1]
Thermal characteristics Parameter thermal resistance from junction to ambient thermal resistance from junction to solder point Conditions in free air
[1][2] [1][3] [4]
Min -
Typ -
Max 350 150 55
Unit K/W K/W K/W
For Schottky barrier diodes thermal runaway has to be considered, as in some applications the reverse power losses PR are a significant part of the total power losses. Nomograms for determining the reverse power losses PR and IF(AV) rating are available on request. Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2. Solder point of cathode tab.
[2] [3] [4]
7. Characteristics
Table 7. Characteristics Tamb = 25 C unless otherwise specified. Symbol VF Parameter forward voltage IF = 10 mA IF = 100 mA IF = 500 mA IF = 1000 mA IR reverse current VR = 5 V VR = 8 V VR = 10 V VR = 15 V VR = 20 V Cd
[1]
Conditions
[1]
Min -
Typ 240 300 400 480 5 7 8 10 15 40
Max 270 350 460 550 10 20 30 50 70 50
Unit mV mV mV mV A A A A A pF
diode capacitance
Pulse test: tp 300 s; 0.02.
VR = 1 V; f = 1 MHz
PMEG2010AEJ_3
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 03 -- 15 January 2010
3 of 9
NXP Semiconductors
PMEG2010AEJ
20 V, 1 A very low VF MEGA Schottky barrier rectifier
104 IF (mA) 103
(1)
006aaa361
105 IR (A) 104 103 102 10 1 10-1 10-2 10-3
006aaa362 (1) (2) (3)
102
(2)
10
(4)
1 10-1 10-2 0 0.1 0.2 0.3
(3) (4) (5)
(5)
0.4
0.5
0.6 0.7 VF (V)
0
5
10
15 VR (V)
20
(1) Tamb = 150 C (2) Tamb = 125 C (3) Tamb = 85 C (4) Tamb = 25 C (5) Tamb = -40 C
(1) Tamb = 150 C (2) Tamb = 125 C (3) Tamb = 85 C (4) Tamb = 25 C (5) Tamb = -40 C
Fig 1.
Forward current as a function of forward voltage; typical values
80 Cd (pF) 60
Fig 2.
Reverse current as a function of reverse voltage; typical values
006aaa363
40
20
0 0 5 10 15 VR (V) 20
Tamb = 25 C; f = 1 MHz
Fig 3.
Diode capacitance as a function of reverse voltage; typical values
PMEG2010AEJ_3
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 03 -- 15 January 2010
4 of 9
NXP Semiconductors
PMEG2010AEJ
20 V, 1 A very low VF MEGA Schottky barrier rectifier
8. Package outline
1.35 1.15 1 0.5 0.3 0.80 0.65
2.7 2.3
1.8 1.6
2 0.40 0.25 Dimensions in mm 0.25 0.10 04-09-13
Fig 4.
Package outline SOD323F (SC-90)
9. Packing information
Table 8. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number PMEG2010AEJ
[1]
Package SOD323F
Description 4 mm pitch, 8 mm tape and reel
Packing quantity 3000 -115 10000 -135
For further information and the availability of packing methods, see Section 14.
10. Soldering
3.05 2.80 2.10 1.60
solder lands solder resist
1.65
0.95
0.50
0.60 occupied area solder paste
0.50 (2x)
001aab169
Reflow soldering is the only recommended soldering method. Dimensions in mm
Fig 5.
Reflow soldering footprint SOD323F (SC-90)
PMEG2010AEJ_3
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 03 -- 15 January 2010
5 of 9
NXP Semiconductors
PMEG2010AEJ
20 V, 1 A very low VF MEGA Schottky barrier rectifier
11. Mounting
43.4 43.4
10 0.6 0.6 0.6 0.6 0.5 0.6 40 0.6 0.5 10 40
Dimensions in mm
006aaa487
Dimensions in mm
006aaa488
PCB thickness: d = 1.6 mm
PCB thickness: d = 1.6 mm
Fig 6.
FR4 PCB, standard footprint SOD323F (SC-90)
Fig 7.
FR4 PCB, mounting pad for cathode 1 cm2 SOD323F (SC-90)
PMEG2010AEJ_3
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 03 -- 15 January 2010
6 of 9
NXP Semiconductors
PMEG2010AEJ
20 V, 1 A very low VF MEGA Schottky barrier rectifier
12. Revision history
Table 9. Revision history Release date 20100115 Data sheet status Product data sheet Change notice Supersedes PMEG2010AEJ_2 Document ID PMEG2010AEJ_3 Modifications:
*
This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal definitions and disclaimers. No changes were made to the technical content. Product data sheet Product data sheet PMEG2010AEJ_1 -
PMEG2010AEJ_2 PMEG2010AEJ_1
20051014 20050302
PMEG2010AEJ_3
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 03 -- 15 January 2010
7 of 9
NXP Semiconductors
PMEG2010AEJ
20 V, 1 A very low VF MEGA Schottky barrier rectifier
13. Legal information
13.1 Data sheet status
Document status[1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet
[1] [2] [3]
Product status[3] Development Qualification Production
Definition This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification.
Please consult the most recently issued document before initiating or completing a design. The term `short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
13.2 Definitions
Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data -- The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding.
13.3 Disclaimers
General -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners.
14. Contact information
For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com
PMEG2010AEJ_3
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 03 -- 15 January 2010
8 of 9
NXP Semiconductors
PMEG2010AEJ
20 V, 1 A very low VF MEGA Schottky barrier rectifier
15. Contents
1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 13.1 13.2 13.3 13.4 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Packing information . . . . . . . . . . . . . . . . . . . . . Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Legal information. . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information. . . . . . . . . . . . . . . . . . . . . . Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 2 2 2 3 3 5 5 5 6 7 8 8 8 8 8 8 9
Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'.
(c) NXP B.V. 2010.
All rights reserved.
For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 15 January 2010 Document identifier: PMEG2010AEJ_3

▲Up To Search▲

Price & Availability of PMEG2010AEJ

	To Download PMEG2010AEJ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .